Wireless
Wireless

RG-AP130(W2) Wall Access Point

Giá: 6,400,000 đ

  • Mã sản phẩm:RG-AP130(W2) Wall Ac
  • Xuất xứTrung Quốc
  • Bảo hành
  • Trạng tháiHàng sẵn kho
Ruijie RG-AP130(W2) Wall AP is designed for wireless deployment in hotels, offices, residential buildings and settings alike, supporting the latest protocol, 802.11ac, and both FAT and FIT modes. The mini-sized wall-mountable AP has the same size as a standard 86-type faceplate with integrated Ethernet and VoIP ports. Featuring a compact design and easy deployment, the AP enables zero disruption to the interior finishes and offers the best solution for scenarios with delicate interior design.
Đặt hàng
Ruijie Networks là một trong 4 nhà sản xuất thiết bị mạng - wifi cấp doanh nghiệp (Enterprise) lớn nhất thế giới (Ruijie, Cisco, HP, Huawei,...). Các sản phẩm cấp doanh nghiệp được kiểm tra và chứng nhận bởi công ty Tolly (USA).
RG-AP130(W2) Wall Access Point là một trong những sản phẩm thuộc bộ sưu tập sản phẩm của Ruijie, được phân phối bởi Công ty CPCN Phúc Bình. Với thiết kế tinh tế kết hợp cùng những tính năng nổi bật, phù hợp sử dụng cho khách sạn, cửa hàng, văn phòng vừa & nhỏ.

RG-AP130(W2) Wall Access Point

High-performance 802.11ac Wall AP 
The Ruijie RG-AP130(W2) Wall AP adopts a dual-radio, dual-band design and supports concurrent operation of 802.11a/n/ac and 802.11b/g/n. The Wall AP provides 4 1000Mbps or 100Mbps RJ-45 ports and 1 RJ-45 transparent Voice/PoE pass-through port (RJ-11 combo). The AP on the rear also offers 1 1000Mbps uplink port and 1 RJ-45 transparent pass-through port (RJ-11 combo). The dual-band 2.4G and 5G coverage can achieve a concurrent coverage supporting 2 spatial streams, providing an unparalleled network experience.

MU-MIMO Support 
The wall-mountable RG-AP130(W2) supports the MU-MIMO feature. Most single-stream end devices only utilize half of the resources of the dual-stream RG-AP130(W2) Wall AP with the other half left unused. The wasted AP resources will stagnate the enhancement of user experience. With the MU-MIMO feature, RG-AP130 (W2) makes full use of the AP resources and is capable to serve two end devices concurrently, improving the user experience.

Simplified Deployment 
The RG-AP130(W2) Wall AP adopts a wall-mounted design with 2-step easy deployment:

Step 1: Remove the original 86-type faceplate from the wall.

Step 2: Directly install the plug-and-play Wall AP and connect with original UTP cable (PoE).

This breaks through traditional wireless network construction methods by reusing existing network cables and minimizes the impact of network construction in hotel or similar settings. As no additional cabling is required, the Wall AP delivers maximum business agility and investment protection. Ruijie also offers a wide range of optional accessories to meet your unique deployment needs.

Stylish Casing in Different Colors
The RG-AP130(W2) Wall AP offers a collection of colorful covers to accommodate various interior design styles. You can select the best fit from gold, white, black and silver. 

Full Signal Coverage
Traditional APs are installed in corridors and the indoor network signals are weak or even completely degenerated after wall penetration. The RG-AP130(W2) Wall AP, on the other hand, can be installed inside the room and hence ensures full coverage anywhere for the best user experience of voice, video or Internet browsing. 

Unified Management of FAT and FIT Modes
The RG-AP130(W2) Wall AP supports both FAT and FIT AP modes, which can be flexibly selected as desired. The Wall AP allows easy upgrade of WLAN to a large-scale network, fully protecting users’ investment costs. In the hotel scenario, the deployment involves a large number of guest rooms and so is the amount of APs. AP management of such a large scale is what current hospitality solutions struggle to guarantee. The RG-AP130(W2) Wall AP offers a simple and easy solution to lessen administrator workload. Teaming up with Ruijie’s Wireless Access Controllers series, the solution enables centralized AP management and fast troubleshooting. Comparing with traditional SOHO APs, the RG-AP130(W2) Wall AP greatly facilitates O&M personnel to manage the whole wireless network.

Smart Identification of End Devices
The RG-AP130(W2) supports smart identification of end devices, which is capable to identify Apple, Android, PC and other smart mobile end devices.

Comprehensive Security Protection
Industry-leading Double Security Designs

The RG-AP130(W2) Wall AP is manufactured using qualified ABS+PC materials, offering superior shock, pressure and temperature resistance for secure deployment. The specially designed screw protects the AP from malicious damage or theft. The Wall AP and color case also guard against theft with a unique security key. The administrator can manage all the APs using one security key with ease. 

User Access Control

The RG-AP130(W2) Wall AP supports a broad library of user authentication methods such as Web, 802.1x, MAC address, and local authentication for customers’ choice. It also supports Ruijie’s end-to-end BYOD (Bring Your Own Device) Solution, complies with a standard access control system, and strictly defines access control policies in terms of user access, authorization, host compliance check, network behavior monitoring, and network threat defense. All these control measures ensure that users are authenticated before accessing a network and securely enjoy network services.

Full Security Protection

Teaming up with Ruijie’s integrated network management system RG-SNC (Smart Network Commander) and RG-WS Wireless Access Controller Series, the Wall AP delivers outstanding security features including Wireless Intrusion Detection System (WIDS), RF interference location, rogue AP countermeasures, anti-ARP spoofing, and DHCP.

Multiple Easy-to-use Authentication Modes

As the key components of Ruijie’s intelligent cloud-based RG-MACC platform, the RG-AP130 Series offers secure and optimal network connections that are required in various scenarios. The RG-AP130 Series supports convenient and high-efficiency Protected Extensible Authentication Protocol (PEAP), web portal authentication, SMS authentication, and voucher (QR code) authentication . 

Voucher (QR code) authentication is another wireless security highlight, enabled by Ruijie’s RG-MACC-SAM platform, which generates one-time or pay-per-use vouchers in recurring or one-time format with time-based policies, streamlining and simplifying the generation and management of QR code or voucher.

 

Model

RG-AP130(W2)

Model

RG-AP130(W2)

Radio

Concurrent dual-band dual-radio

Protocol

802.11a/b/g/n, 802.11ac Wave 1, 802.11ac Wave 2

Operating Bands

2.4GHz and 5GHz

Antenna

Built-in omnidirectional antenna
2x2 MU-MIMO

Spatial Streams

2

Modulation

11b: DSS:CCK@5.5/11Mbps, DQPSK@2Mbps, DBPSK@1Mbps

11a/g: OFDM:64QAM@48/54Mbps, 16QAM@24Mbps, QPSK@12/18Mbps, BPSK@6/9Mbps

11n: MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM

11ac: MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM, 256QAM

Maximum Transmit Power

≤100mW (20dBm, transmit power of the RF card only)

Service Ports

Front:
4 10/100/1000M Ethernet ports
Side:
1 RJ-45 port (RJ-11 combo)
Rear:
1 10/100/1000M uplink port
1 RJ-45 pass-through port (RJ-11 combo)

Management Port

1 console port (Micro USB)

Lock

Standard: Anti-theft screws and ordinary screws
Optional: Lock and key

Color Plate Cover Options

White, black, silver and gold

LED Indicators

1 LED status indicator

IP Rating

IP41

WLAN

Maximum clients per AP

Up to 32

BSSID capacity

Up to 8 per radio
Up to 16 per AP

SSID hiding

Support

Configuring the authentication mode, encryption mechanism, and VLAN attributes for each SSID

Support

Remote Intelligent Perception Technology (RIPT)

Support

Intelligent identification of smart device

Support

Intelligent load balancing based on the number of users or traffic

Support

STA control

SSID/radio-based

Bandwidth control

STA/SSID/AP-based speed control

Security

PSK, Web, and 802.1x authentication

Support

Data encryption

WPA (TKIP), WPA2 (AES) , WPA-PSK, and WEP (64 or 128 bits)

QR code authentication

Support

SMS authentication

Support

PEAP authentication

Support

Data frame filtering

Whitelist, static/dynamic blacklist

User isolation

Support

Rogue AP detection and countermeasure

Support

Dynamic ACL assignment

Support

RADIUS

Support

CPU Protection Policy (CPP)

Support

Network Foundation Protection Policy (NFPP)

Support

Wireless Intrusion Detection System (WIDS)

Support

Remote probe

Future release support

Routing

IPv4 address

Static IP address or DHCP reservation

Multicast

Multicast to unicast conversion

Location-based Service

Wireless position tracking

Support

Management and Maintenance

Network management

SNMP v1/v2C/v3, Telnet, TFTP, FTP and web management

Visualized wireless heat map analysis

Support

Real-time spectrum analysis

Support

Fault detection and alarm

Support

Statistics and logs

Support

FAT/FIT switching

The AP working in FIT mode can switch to the FAT mode through the RG-WS wireless AC.
The AP working in FAT mode can switch to the FIT mode through a local console port or Telnet.

Dimensions (W x D x H) (mm)

116 × 86 × 42

Weight

0.23kg

Installation Mode

Standard 86-type faceplate installation

Power Supply

PoE (802.3af), local DC power supply

Power Consumption

<8W

Temperature

Operating Temperature: -10°C to 45°C

Storage Temperature: -40°C to 70°C

Humidity

Operating Humidity: 10% to 95% (non-condensing)

Storage Humidity: 5% to 95% (non-condensing)


Xem thêm